Q37全系列吊鉤式拋丸進行清理機

◆貨品反映 Product description

Q37(Q75)系列產品吊鉤式拋(噴)丸清理工作機是屬于我公司的成功研制的一種生活創新機器設備。是在中國外寬泛調研會的基礎條件上，通過用戶名的實際情況供需而設計的概念的。

吊鉤式噴砂機兼備下面缺點有哪些：

1. 通過大拋丸量、高拋射速度慢的懸臂式離心法拋丸器，能偏態地提供進行清洗率、擁有中意的進行清洗質理。

2. 模似拋射圖及拋丸清理機的所有圖子均基本主要采用計算方式機幫助的設計(CAD)畫出，拋丸器的使用及設計而非有效率。

3. 所采用頗受的歡迎的無地坑設備構造的方式，即節儉了地坑前提的使用花費按時間，又防止了顧客因地坑蓄水而誘發的加強機內的丸砂浮銹變成塊狀故障。

吊鉤具備有升降調節、使用和陽臺陽光房電動機的職能。

4. 清掉室內設計選取高鉻板衛生防護，運行使用年限小臭增強，造型顏值、更能調換。

自主：需拋丸處里的部件立即底盤在吊鉤或掛馬路上，手工帶至拋丸室前部的帶動系統化，吊鉤自主完成拋丸室。吊鉤完成拋丸室后，拋丸室門將汽動開起，電氣公司互鎖，以降低部件在拋丸房間完成拋丸處里時陌生人誤開拋丸室門。吊鉤完成拋丸室在確定的范圍內座位作往返往返的運動和自轉，使部件給予做好拋射，降低拋射衛生死角。二個吊鉤、1個吊鉤在拋丸房間拋射，另1個吊鉤可卸車部件。拋丸處里的日期電機設備尺寸調控。拋丸器停此轉動后拋丸室門打開，以帶進和帶出部件。拋丸處里中帶來的煙塵由2級降塵器吸附排放口。

Q37(Q75) hook typeshot cleaning machine is a new equipment developed by our company. It is widely based on the research of the user, according to the actual needs of the design at home and abroad.

Advantages:

1. The amount shot, high speed of aerosol propellant international advanced cantilever centrifugal peen-forming implement, can improve clean rate, obtain satisfactory cleaning quality.

2. Trajectory simulation diagram and the machine shot all drawings are completely using computer aided design (CAD) is drawn, is shot selection and arrangement of the more reasonable.

3. The highly popular no pit structure , namely save the pit of the construction cost and time based, and solves the user for pit and cause the ascension of the standing device inside the pill sand. Corrosion agglomerate hook up with, operation, and the function of the indoor spin.

4. Clean indoor with using high chrome plate protection, service life greatly improved, beautiful appearance, easy to change.

Automatic: The workpiece need to shot is directlyhanged in the treatment or hang hooks on toshot, artificial with the front of the room, hook automatic traction systemshot into the room. Hook into is shot peen-forming room after room, pneumatic, electric interlocking goalkeeper closed, in order to avoid the workpiece in indoors is shot peen-forming processing by mistake when others open peen-forming room door. Hook into the room is shot in the back and forth position set interval reciprocal motion and rotation, to make the work be fully aerosol propellant, reduce aerosol propellant blind Angle. Two hooks, a hook on peen-forming indoor aerosol propellant, another hook can be unloading workpieces. Peen-forming processing time can be arbitrary adjustment. After the stop is shot peen-forming room door open, in order to bring in and take workpiece.Shot in the treatment of dust produced by secondary filter filter emissions.

◆可用于區間 Applicable scope

鋁各種各種合金壓鑄件、鋅各種各種合金壓鑄件、銅鑄件、裝飾管精密制造鑄件、鑄件件、踏板摩托窗框及不銹鋼品件的界面清理工作、光飾、提升。

Aluminium alloy die casting, zinc alloy die casting, the copper pieces, stainless steel precision castings, castings, motorcycle frame and steel products a surface cleaning, light act the role ofing, strengthening.

Q37類型吊鉤式拋丸清掃機

◆設備特質 Product features

1、基準華燁一百三二十年間末的拋丸清理機展開國內自主研發化制造技術。

2、拋丸器用到直聯三相電動機驅程，三相電動機為交流變頻三相電動機，可交流變頻調壓。

3、鋼丸水流量抑制閥可輕微設定，氣動系統上線與關畢。

4、采取芯筒智能布袋除塵器原理式布袋除塵機系統。

5、電力主要包括PLC保持PLC的控制儀配用英國三凌，電子食品器件配用simens或歐姆龍食品。

6、無地坑設計制作。

1. Peference toGermany at the end of the ninety’s shot used the machine manufacturing.

2. Shot machinehas the direct coupling motor drive, motor for frequency conversion motor,variable frequency speed regulation.

3. Steel shot flow control valves can trace adjustment, pneumatic open and shut.

4. The world's most advanced core canister pulse blow type dust removal system.

5. Electrical PLC control PLC control instrument selection Japan mitsubishi, electricalcomponents choose Siemens or omron products.

6. Design without pit.

◆設備就說明 Product description

1、在標準化款型中，拋丸機廠家標配手動式擺軟件系統。

2、相對重形類件，通過式拋丸機可選擇供配電動鋼絲繩電動葫蘆。

3、拋丸室的門有油路分配器或自功開啟閉合。

1. In the standard model, shot machine is equipped with manual suspension system.

2. For heavy workpiece, shot machine can be equipped with electric hoist.

3. The door of the room has a pneumatic or manual opening and closing.

自動：本型整理機可以于壓鑄、房屋建筑、藍翔塑業四虎影视免费永久大全-四虎8848精品成人免费网站-四虎视频国产精品免费入口-四虎4hu永久免费网站影院所生產的、變頻電動機、數控加工中心等餐飲行業的中、小形鑄、鍛件的的表層整理或進階整理。有點可以于多類種、小文件批量的鑄件、鍛件、鋁碳素鋼鑄件及鋼的結構件實行的表層整理及拋丸進階，以除掉產品的表層的極富粘砂、砂芯及鈍化皮；亦可以于對熱整理件的的表層整理及進階；還是比較可以于不能摩擦的細長、簿壁件的整理。

manual operation: This type of cleaning machine for foundry, construction, chemical, electric machine, machine tools, and other industries, small casting, forging of surface cleaning or strengthen treatment. Particularly suitable for variety of and small batch of castings, forgings, aluminum alloy castings steel structure and surface cleaning and peen-forming reinforcement to remove a small amount of the surface adhering sand, sand core and oxide skin; Also suitable for heat treatment a surface cleaning and strengthened; Especially suitable for long, should not be collision thin-walled package to clear.

We use shot technology to achieveshot cleaning rust, strengthen the purpose, because cleaning now is still the world's most economic and the most reliable method.

◆新產品性能 Product features

* 增進機械設備品牌和金屬結構’的抗損耗效果

Lmproving the anti-fatigueperformance ofmechanical products and metal components

* 除去內應力分散

Eliminate stress concentration

* 增長其用到使用時間

Prolong the service life

* 優化方案鏜孔的外表面加工制作工藝 壯態

Optimizate the surface of the workpiece

* 盡可能延長清除垃圾率

Greatly improve the efficiency of cleaning up

* 緩解清理工作的工作的的勞動課比強度

Reduce the labor intensity of cleaning up

* 緩解大環境影響

Reduce environmental pollution

◆應用的范圍 Applicable scope

本型專用設備廣應該用在機誡創造、市政工程機誡、采石廠機誡、的高壓容器設計、氣車、運輸船只等該行業，用在的提升其新產品零組件的外貌線質量和外壁藝形態。

This equipment is widely used in mechanical manufacturing, engineering machinery, mining machinery, pressure vessel, automobile, shipbuilding industry, used for improving the product quality and the appearance of the parts surface process condition.

◆其主要工藝參數設置 Main technical parameters