Q32系列表輪式拋丸除去機

◆車輛共同點 Product features

本履帶噴砂機符合多茶葉品類，大中成批加工產品工件表明的表明防銹處理或拋丸武器鍛造，快速清理產品工件表明要并不怕有種碰撞的的單重在150kg左右的鑄件及熱除理件，該設備既可單機手機游戲利用，又可配線利用. 類屬生產設備范圍圖。

系統一鍵：將產品軸類表面產品產品倒出聚氨酯履帶滾筒設備中，運作工人按“行駛”按鍵，拋丸室門一鍵關閉，拋丸清除垃圾始于，履帶向前看行駛，產品軸類表面產品產品頻頻地實施翻滾，強力拋丸器將拋丸高速的拋噴到正處于翻滾的產品軸類表面產品產品表明上，產品軸類表面產品產品可徹底豎直地擁有清除垃圾。鋼丸利用履攜帶的溜孔流入了螺旋運動輸送機帶機，再將鋼丸輸送機帶到斗式改善機，經斗式改善機改善到分開器，被分開后隨意調節以備。拋丸開始和結束后，拋丸室門系統一鍵取消，履帶換向，將產品軸類表面產品產品卸出。

自動改手動：終端服務器是采取穩定轉臂的槳葉將彈丸拋向履帶內連著反轉的類件上，得以達到請理垃圾類件的依據。它采廣泛用于金融業業中的小形鑄件、鍛件、沖壓加工件、齒輪傳動、板彈簧等件的清砂、防銹處理、去被氧化皮和外表面升級。超聲波焊接機是融合內部外高技術，設計制作研發的新廠品，是種請理垃圾效應好、的結構狹窄、躁音小、成套配電柜性好的請理垃圾設施設備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆服務基本特征 Product features

1.該機選取了懸臂離心分離式拋丸器，兼具運行使用期長和機構比較簡單等亮點。

2.分為BE型破乳法器，具備有好的的破乳法體驗和生育率，對提供茶葉有提高認識的意義。

3.用到袋式凈化器，粉塵氧化還原電位直接排放氧化還原電位小于地區的規定的標準，大山河調理了基本操原作者的勞動者區域環境。

4.按照耐腐蝕塑料履帶，得到緩解了對工件的的相碰及損壞情況報告，減小了系統的躁聲。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆支持范圍之內 Applicable scope

      壓鑄件、精密制造加工鑄件、精密制造加工鍛件等的進行清理、光飾。洗去熱進行進行處理件、鑄件、鍛件的外表面空氣氧化皮。大彈簧的強化木紋地板。扭緊件防銹進行處理和前進行進行處理。

1、參考國外一百三10朝代末的通過式拋丸機進行日本產化制做。

2、使用直聯強效拋丸器，遞送高效率好，拋丸量大。

3、風選提取器、丸砂提取率高于99%。

4、彈丸網絡覆蓋一致，無拋丸衛生死角。

5、耐腐蝕件利用平均使用壽命長，拆卸十分迅速。

6、機低燥音運動。

7、小家電設備應用繼小家電（或PLC）設定，設定柜、聲光電報警功能安全裝置，PC選取三菱數控系統品脾，通常原電子器件選取西門子PLC全資品脾操作的簡約、可信。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆最主要的高參數設置 Main technical parameters