噴漆主設備品類

STR-NKP-1型排水管罐壁靜電噴涂器  Spraying machine for piping inner wall

◆常用時間范圍 Applicable scope

廣泛用于于圓洞及大型通道鋪設的壁有表明處理，它是充分利用無氣噴水性金屬漆機輸料來的高電壓水性金屬漆，確認珍品的霧炮，使水性金屬漆霧化吸入后可以直接達成汽車喇叭形（園圓錐形、塊實心），不規則地噴在通道鋪設內表明，而使體現通道鋪設的表明處理。 NKP-1型通常支持于Ф50-Ф300mm的地埋管，水性金屬漆粘度指數不可以大于80秒（4號福特杯）。若水性涂料凝固點高與80秒，用加有機溶劑就稀釋。NKP-1型一般上不被排水管粗度的限制，但盡量不善于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

布置方框圖 Installation to which