吸式缺水機

◆產品的特征 Product features

※體現了穩定可靠相同的吸氣工作壓力和露點

1.活性炭吸附塔之高與長度經實驗室沒想到五金機械計算出來，塔床發展阻力小，絕對了壓縮的有機廢氣氣體皮膚干燥劑5秒的碰觸時段，無法的成品氣的露點規定。

2.30％的吹干劑總流量，用作賠賞吹干劑的清新退化，提高認識吹干。

3.魔幻對外擴散器，保持空氣更加均勻順利通過干躁劑層，削除溝流這種現象。

※凈化氣量損耗量低于14％

1.有遠見的機筒規劃，儲存100％的離心分離能量，補充的能量適用于增大重復利用一階段的重復利用氣室內溫度，提升 產品的解吸業務能力，可使重復利用更徹底。

2.太干和機體再生能力用于選擇性對流換熱系數措施，濕的空氣流走干的粘附劑追訴時效果比較好。機體再生能力氣出口國含濕量調整在亞飽和的情形的情形，使消音器及排氣管通路無冷凝水之慮。

3.可只能根據變干機的行駛裝載各種需求調節器復蘇氣劑量，確保安全復蘇空氣連繼穩定的，復蘇負壓低至臨界狀態。

※晾干劑選擇人類使用期長

1.比較適合的機筒的尺寸，使氣體根據低溫變干劑層的流動速度和時期堅持好的的狀態，充分地推動低溫變干劑的性能指標。

2.適宜的系統配備，在環流開啟機筒前，經除油操作盡快處理環流中內植物油成分物與重廢棄物物，杜絕非常干燥劑層受廢棄物。

※設備用于了貼近生活高高質量電動伸縮及液壓閥和耐用的全自動的化可程序編程序掌握器，組隊軟件界面友好合作，自動的間斷性呈現雙塔工作內容，間歇時間段車間可編，出產添加10min。管道閥門平均壽命短短50萬次運動。

※壓力容器封頭罐壁作冷熱浸鍍鋅防銹處理處理，10年不生銹腐蝕現象。

※姿態準確性、安全性能維持、操作流程非常簡單，按照需不需要知識基礎。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆重要方法主要參數 Main technical parameters